Performance Evaluation of Concentric Triple Tube Heat Exchanger by using CFD
Keywords:Heat Exchanger, Rib, Temperature, TCTHE.
The main objective of this work is to design a concentric three-cylinder heat exchanger for better heat movement, using a sum of four expansions to verify its hot presentation under similar boundary conditions. For this reason, the second creep condition is specified for robust dividers where the heat flow for the outer side divider is concentrated to achieve an adiabatic state while the dividers and inner vanes of the cylinder are coupled. The deltas for the outside and inside of the line are characterized as mass flow trees; The power source is marked as an outlet with a pressure factor. Flow programming is used to determine the movement of liquid and heat flow in the measurement zones. The applicable conditions are governed iteratively by the limited volume details with the SIMPLE calculation. The RNG-k-epsilon model is used for storm currents because the impact of eddies on strong currents is more accurate than the standard k-epsilon model and the second booster graph method is used for the deflection of the eruptive energy and the its propagation speed. The results show that computer examination of the liquid elements of a concentric three-tube heat exchanger with inclined scales at 45 ° C provides the circulation temperature, the speed of heat movement, and, in general, a coefficient of thermal movement. more than 11.74% higher than sloped blades are at 30 ° C and 28.96% higher than straight stairs, 9mm high and 42.22% higher than three tube heat exchangers concentric fins.
Mahmoud Mohammed Abdelmagied "Investigation of the triple conically tube thermal performance characteristics" International Communications in Heat and Mass Transfer 119 (2020) 104981. doi.org/10.1016/j.icheatmasstransfer.2020.104981
Amin Shahsavar et al. " Entropy and Thermal performance Analysis of PCM Melting and Solidification Mechanisms in a Wavy Channel Triplex-Tube Heat Exchanger", Renewable Energy, Accepted Date: 15 November 2020, https://doi.org/10.1016/j.renene.2020.11.074.
Mahmoud Abdelmagied "Experimental study of a triple spirally coiled tube heat exchanger thermo-fluid characteristics" Applied Thermal Engineering 180 (2020) 115803. https://doi.org/10.1016/j.applthermaleng.2020.115803.
Ahmed H.N. Al-Mudhafar et al. "Performance enhancement of PCM latent heat thermal energy storage system utilizing a modified webbed tube heat exchanger",4th Annual CDT Conference in Energy Storage and Its Applications, Professor Andrew Cruden, 2019, 07-19, University of Southampton, U.K, Energy Reports 6 (2020) 76–85. https://doi.org/10.1016/j.egyr.2020.02.030.
Cao X, Zhang N, Yuan Y & Luo X "Thermal performance of triplex-tube latent heat storage exchanger: simultaneous heat storage and hot water supply via condensation heat recovery" Renewable Energy (2020), doi.org/10.1016/j.renene.2020.05.059.
Vo Tuyen, Nguyen Van Hap & Nguyen Minh Phu "Thermal-hydraulic characteristics and optimization of a liquid-to-suction triple-tube heat exchanger" , University of Food Industry (HUFI), Ho Chi Minh City, Viet Nam, Case Studies in Thermal Engineering 19 (2020) 100635. https://doi.org/10.1016/j.csite.2020.100635.
Z. Li et al. "Effect of porous medium and nano-particles presences in a counter-current triple tube composite porous/nano-PCM system", Applied Thermal Engineering (2019), doi:https://doi.org/10.1016/j.applthermaleng.2019.114777.
Abdelmagied M "Thermal Performance Characteristics of a Triple Spiral Tube Heat Exchanger" , Chemical Engineering and Processing - Process Intensification (2019), doi: https://doi.org/10.1016/j.cep.2019.107707.
Hossein Javadi et al. "Thermal analysis of a triple helix ground heat exchanger using numerical simulation and multiple linear regression" University of Science and Technology, Babol, 47166-85635, Iran, Geothermics 81 (2019) 53–73. https://doi.org/10.1016/j.geothermics.2019.04.005.
Nima Mazaheri et al. "Analyzing performance of a ribbed triple-tube heat exchanger operated with graphene nanoplatelets nanofluid based on entropy generation and exergy destruction" Kermanshah University of Technology, Kermanshah, Iran, International Communications in Heat and Mass Transfer 107 (2019) 55–67. https://doi.org/10.1016/j.icheatmasstransfer.2019.05.015.
How to Cite
Copyright (c) 2021 Suryakant, Dr Rajeev Arya
This work is licensed under a Creative Commons Attribution 4.0 International License.
IJOSCIENCE follows an Open Journal Access policy. Authors retain the copyright of the original work and grant the rights of publication to the publisher with the work simultaneously licensed under a Creative Commons CC BY License that allows others to distribute, remix, adapt, and build upon your work, even commercially, as long as they credit you for the original creation. Authors are permitted to post their work in institutional repositories, social media or other platforms.
Under the following terms:
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.