CFD Analysis of Various Design Aspects in Baffle Tube Heat Exchanger
DOI:
https://doi.org/10.24113/ijoscience.v8i3.479Keywords:
Baffled channel, Cu-water, nanofluids, thermo hydraulic performance, CFDAbstract
To improve temperature difference, a computer simulation assessment for a rectangular duct with right angle confounds heat exchanger with small displacements and bewilder height was carried out. A total of 10 There were three separate two half Autocad models of rectangular shaped channel with bewilders spacing of 40 milimetre, 80 milimetre, and 120 milimetre and baffle heights of 10 mm, 12.5 milimetre, and 15 milimetre developed. The major goal of this study is to run computer simulations to see how Cu water nanoparticle affect the architecture and thermally hydrodynamic characteristics of a rectangular duct with baffles exchanger. The bottom walls of the canal, as well as the baffles, are regarded isothermal zones, whereas the sidewalls are termed regular zones. This approach employs a second derivative upwind mass and energy equation. The baffle pitch and height have a significant influence on the temperature distribution from the rectangle shaped channel heating element, with a maximal temperature fluctuations of 9.831oC and a maximum heat transfer of 6.571 KW for baffle spacing 40 mm and height 15 mm for rectangle channel without opposite baffles. In comparison to the base design of rectangle shaped channels exchanger, the temperature difference increases nearly 1.5 times as even the width is decreased.
Downloads
References
Cao, X., Zhang, R., Chen, D., Chen, L., Du, T., & Yu, H. (2021). Performance investigation and multi-objective optimization of helical baffle heat exchangers based on thermodynamic and economic analyses. International Journal of Heat and Mass Transfer, 176, 121489. https://doi.org/10.1016/j.ijheatmasstransfer.2021.121489
Cai, H. fei, Jiang, Y. yan, Wang, T., Liang, S. qiang, Guo, C., & Zhu, Y. ming. (2021). An optimization of microtube heat exchangers for supercritical CO2 cooling based on numerical and theoretical analysis. International Communications in Heat and Mass Transfer, 127(August), 105532. https://doi.org/10.1016/j.icheatmasstransfer.2021.105532
Thondiyil, D., &Kodakkattu, S. K. (2021). Materials Today?: Proceedings Optimization of a shell and tube heat exchanger with staggered baffles using Taguchi method. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2021.04.092
Menni, Y., Lorenzini, G., Kumar, R., Mosavati, B., &Nekoonam, S. (2021). Aerodynamic Fields inside S-Shaped Baffled-Channel Air-Heat Exchangers. 2021.
Pushpa, B. V, Do, Y., &Sankar, M. (2021). Control of buoyant flow and heat dissipation in a porous annular chamber using a thin baffle. https://doi.org/10.1007/s12648-021-02120-2
Boonloi, A., &Jedsadaratanachai, W. (2021). Case Studies in Thermal Engineering Numerical assessments of flow pattern and heat transfer profile for the round tube equipped with different configurations of the dual-inclined baffle. Case Studies in Thermal Engineering, 27(July), 101242. https://doi.org/10.1016/j.csite.2021.101242
Salhi, J., Zarrouk, T., &Salhi, N. (2021). Materials Today?: Proceedings Numerical study of the thermo-energy of a tubular heat exchanger with longitudinal baffles. Materials Today: Proceedings, 45, 7306–7313. https://doi.org/10.1016/j.matpr.2020.12.1213
Lesnoy, D. V, &Churakova, S. K. (2021). Segmental Baffles As A Means Of Improving The Heat Transfer Efficiency Of Air Coolers. 57(2), 106–112. https://doi.org/10.1007/s10556-021-00902-3
El-said, E. M. S., Elsheikh, A. H., & El-tahan, H. R. (2021). International Journal of Thermal Sciences Effect of curved segmental baffle on a shell and tube heat exchanger thermohydraulic performance?: Numerical investigation. International Journal of Thermal Sciences, 165(August 2020), 106922. https://doi.org/10.1016/j.ijthermalsci.2021.106922
Gu, H., Chen, Y., Wu, J., Fei, F., &Sundén, B. (2021). International Journal of Heat and Mass Transfer Performance investigation on the novel anti-leakage and easy-to-manufacture trisection helical baffle electric heaters. International Journal of Heat and Mass Transfer, 172, 121142. https://doi.org/10.1016/j.ijheatmasstransfer.2021.121142
Wang, J., Bian, H., Cao, X., & Ding, M. (2020). Numerical performance analysis of a novel shell-and-tube oil cooler with wire-wound and crescent baffles. Applied Thermal Engineering, July, 116298. https://doi.org/10.1016/j.applthermaleng.2020.116298
Kadhim, R., Sopian, K., &Zulkifli, R. (2020). Thermal-hydraulic performance and design parameters in a curved-corrugated channel with L-shaped baffles and nanofluid. Journal of Energy Storage, October, 101996. https://doi.org/10.1016/j.est.2020.101996
Rashkovan, A., Ziskind, G., &Bieder, U. (2021). Baffle jetting modeling. Nuclear Engineering and Design, 379(September 2020), 111233. https://doi.org/10.1016/j.nucengdes.2021.111233
Parsa, H., Saffar-avval, M., & Hajmohammadi, M. R. (2021). International Journal of Mechanical Sciences 3D simulation and parametric optimization of a solar air heater with a novel staggered cuboid baffles. International Journal of Mechanical Sciences, 205(June), 106607. https://doi.org/10.1016/j.ijmecsci.2021.106607
Bahiraei, M., Naseri, M., &Monavari, A. (2021). Irreversibility features of a shell-and-tube heat exchanger fitted with novel trapezoidal oblique baffles?: Application of a nanofluid with different particle shapes. International Communications in Heat and Mass Transfer, 126(May), 105352. https://doi.org/10.1016/j.icheatmasstransfer.2021.105352
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Ajeet Kumar Mishra, Prof. Shamir Daniel, Prof. Amit Kumar Asthana
This work is licensed under a Creative Commons Attribution 4.0 International License.
IJOSCIENCE follows an Open Journal Access policy. Authors retain the copyright of the original work and grant the rights of publication to the publisher with the work simultaneously licensed under a Creative Commons CC BY License that allows others to distribute, remix, adapt, and build upon your work, even commercially, as long as they credit you for the original creation. Authors are permitted to post their work in institutional repositories, social media or other platforms.
Under the following terms:
-
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
