Heat Exchanger Handling MWCNT/Water Nanofluids
DOI:
https://doi.org/10.24113/ijoscience.v7i3.360Keywords:
Heat Exchanger, Helically Coil, CFD, ANSYS.Abstract
Heat exchangers are an essential part in an assortment of mechanical settings, for example, cooling frameworks, force plants, refineries, and in this way ceaseless endeavor are made to expand their heat transfer efficiencies. Optimize design of helical coil heat exchanger by using fins and the Compare pressure & temperature by conventional design. The final outcome of the study increase the total heat transfer rate inside the domain. And increase the pressure drop inside the domain. The water outlet temperature decrease up to 315k and cold outlet temperature increase up to 320 k. and total pressure drop increase with the temperature increases. Finally the CFD data were compared with previous data the total pressure drop increase up to 0.65 bar for case-2.the overall efficiency of the system incites up to 5% to 6%.
Downloads
References
Mehdi Bahiraei Reza Rahmani “Recent research contributions concerning use of nanofluids in heat exchangers: Volume 133, 25 March 2018, Pages 137-159
Nima Mazaheri, Ali Rizehvandi “Application of a hybrid nanofluid containing graphene nanoplatelet–platinum composite powder in a triple-tube heat exchanger equipped with inserted ribs” DOI: 10.1016/j.applthermaleng.2018.12.072 December 2018
Reza Rahmani, Ali Yaghoobi “Recent research contributions concerning use of nanofluids in heat exchangers: DOI: 10.1016/j.applthermaleng.2018.01.041 March 2018.
Umang K Patel, Prof. Krunal Patel “CFD Analysis Helical Coil Heat Exchanger”, IJARIIE-ISSN(O)-2395-4396, Vol-3 Issue-2 2017.
Syed Mohammed Arif, Rashed Ali “CFD Analysis of Heat Transfer in Helical Coil”, International Research Journal of Engineering and Technology (IRJET), Volume: 04 Issue: 03 | Mar -2017.
Pramod S. Purandare, Mandar M. Lele, Raj Kumar Gupta “Investigation on thermal analysis of conical coil heat exchanger” Int. J. Heat Mass Transf., 90 (2015), pp. 1188-1196.
K. Abdul Hamid, W. H. Azmi, RIzalman Mamat, N. A. Usri and Gohalamhassan Najafi 2015, "Effect of Titanium Oxide Nanofluid Concentration on Pressure drop" ARPN Journal of Engineering and Applied Sciences, Volume 10, Page 7815-7820.
Shiva Kumar, K Vasudev Karanth 2013, "Numerical analysis of a Helical Coiled Heat Exchanger using CFD" International Journal of Thermal Technologies, Volume 3, Page 126-130.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Md Jasim Alam, Mr. Yasir Baig
This work is licensed under a Creative Commons Attribution 4.0 International License.
IJOSCIENCE follows an Open Journal Access policy. Authors retain the copyright of the original work and grant the rights of publication to the publisher with the work simultaneously licensed under a Creative Commons CC BY License that allows others to distribute, remix, adapt, and build upon your work, even commercially, as long as they credit you for the original creation. Authors are permitted to post their work in institutional repositories, social media or other platforms.
Under the following terms:
-
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
