A Review of CFD Analysis of Heat Exchanger for Laminar Flow
DOI:
https://doi.org/10.24113/ijoscience.v7i3.363Keywords:
CFD, Helical Coil, Heat Exchanger, Temperature.Abstract
Helical coil heat exchangers, due to their maturity, are widely used in industrial applications such as the chemical and food industry, power generation, electronics, environmental technology, manufacturing industry, air conditioning, waste heat recovery, etc. on straight and cup heat exchangers. With its compact structure, larger heat transfer area and higher heat transfer capacity, etc., the twisted tap and classification of improvement techniques are presented in this paper. To present the dynamics, application, and advantages of CFD for computational fluids presented in this paper.
Downloads
References
Dheeraj Shriwas, Mr. Jagdeesh Sain “Heat Transfer Enhancement Technique in Heat Exchanger: An Overview”, 2018 IJRTI | Volume 3, Issue 9 | ISSN: 2456-3315.
Indri Yaningsih, Agung Tri Wijayanta “V-cut Twisted Tape Insert Effect on Heat Transfer Enhancement of Single Phase Turbulent Flow Heat Exchanger”, AIP Conference Proceedings 1931, 030038 (2018); https://doi.org/10.1063/1.5024097.
Tushar R. Shinde, Prof. D. G. Kumbhar “A Review on Experimental and CFD Analysis for Heat Transfer Enhancement in Heat Exchanger Tube using Drilled Twisted Tape Inserts of various Geometries”, International Research Journal of Engineering and Technology (IRJET), Volume: 04 Issue: 06 | June -2017.
Suhas V. Patil and P. V.Vijay Babu “Heat Transfer Augmentation in a Circular tube and Square duct Fitted with Swirl Flow Generators: A Review”, International Journal of Chemical Engineering and Applications, Vol. 2 , No. 5 , October 2011.
Nimish Dubey, Morrish Kumar “CFD Analysis of Fluid Flowing Through a Heat Exchanger Tube Having a Twisted Tape with a Centrally Placed Semi-Circular Groove”, International Journal of Science and Research (IJSR), Volume 6 Issue 6, June 2017.
Shubham Jadhav, Jayesh Jain “Heat Transfer Augmentation Technique Using Twisted Tape Insert”, International Conference on Ideas, Impact and Innovation in Mechanical Engineering (ICIIIME 2017), Volume: 5 Issue: 6 2017.
Orhan Keklikcioglu, and Veysel Ozceyhan “A Review of Heat Transfer Enhancement Methods Using Coiled Wire and Twisted Tape Inserts”, 2018.
Versteg H. and Malasekara W, An Introduction to Computational Fluid Dynamics, (2nd edition, year of publication-2007), Pearson Publications.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Ravi Shankar Kumar, D.S. Chauhan
This work is licensed under a Creative Commons Attribution 4.0 International License.
IJOSCIENCE follows an Open Journal Access policy. Authors retain the copyright of the original work and grant the rights of publication to the publisher with the work simultaneously licensed under a Creative Commons CC BY License that allows others to distribute, remix, adapt, and build upon your work, even commercially, as long as they credit you for the original creation. Authors are permitted to post their work in institutional repositories, social media or other platforms.
Under the following terms:
-
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
