A Review on the Performance Analysis of Engine Bracket
DOI:
https://doi.org/10.24113/ijoscience.v5i9.223Keywords:
Modal Analysis; Static Analysis; Optimization; Mounting Bracket; Hyper mesh, Optistruct.Abstract
Engine mounts have an important function of containing firmly the power-train components of a vehicle. Correct geometry and positioning of the mount brackets on the chassis ensure a good ride quality and performance. As an FSAE car intends to be a high performance vehicle, the brackets on the frame that support the engine undergo high static and dynamic stresses as well as huge amount of vibrations. Hence, dissipating the vibrational energy and keeping the stresses under a pre-determined level of safety have been achieved by careful designing and analysis of the mount brackets.
Downloads
References
[2] Jasvir Singh Dhillon, Vikram Sawant “Design of Engine Mount Bracket for a FSAE Car Using Finite Element Analysis” Int. Journal of Engineering Research and Applications.2015
[3] Sebastian C S, “Design and Optimization of Engine Mount Bracket” International Journal of Application or Innovation in Engineering & Management (IJAIEM) 2016.
[4] Amol S Adkine, Vaibhav S Kathavate “Static Behaviour of Engine Mounting Bracket” DOI: 10.17148/IARJSET.2015.2416 May 2015?
[5] Vaibhav S Kathavate, Amol S Adkine “Optimization In Design Parameters Of Engine Mounting Bracket” March 2015
[6] Sahil Naghate, Sandeep Patil, “Modal Analysis Of Engine Mounting Bracket Using FEA”, International Journal of Engineering Research and Applications (IJERA), Vol. 2. Issue4. July-August-2012,pp.1973-1979.
[7] Koushik S.,” Static and Vibration Analysis of Engine mounting Bracket of TMX-20-2 using OptiStruct”, Altair Technology Conference, India -2013.
Downloads
Published
Issue
Section
License
Copyright (c) 2019 Shiv Kumar Pandit, Ashish Shrivastava
This work is licensed under a Creative Commons Attribution 4.0 International License.
IJOSCIENCE follows an Open Journal Access policy. Authors retain the copyright of the original work and grant the rights of publication to the publisher with the work simultaneously licensed under a Creative Commons CC BY License that allows others to distribute, remix, adapt, and build upon your work, even commercially, as long as they credit you for the original creation. Authors are permitted to post their work in institutional repositories, social media or other platforms.
Under the following terms:
-
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
