Design and Evaluate A Model of Vehicle Suspension System by Using Fem

Authors

  • Vikesh Kumar Ranjan M. Tech. Scholar, NRI Institute of Information Science and Technology Bhopal, India
  • Arun Patel Professor, NRI Institute of Information Science and Technology Bhopal, India

DOI:

https://doi.org/10.24113/ijoscience.v5i10.231

Keywords:

FEA, ANYSIS, CATIA, Aluminum, cast iron, Titanium.

Abstract

The suspension system assists the vehicle's braking system in terms of safety, driving pleasure and passenger comfort when driving without road noise, bumps or vibrations. If the roads were perfectly smooth, a vehicle suspension system would not be necessary. As a result, the wheel of the machine undergoes a sudden vertical movement as it moves over the bumps. To improve the stability of the suspension system design multiple spring in vehicle suspension system and the design multiple spring in vehicle suspension system for different materials to enhance the results. Final conclusion of the analysis the Titanium Ti-6Al-4V is the much batter material than other two materials Cast iron and titanium Ti-13V-11Cr-3Al.  Because the yield stress of Titanium Ti-6Al-4V is higher the titanium Ti-13V-11Cr-3Al. And the density of the Titanium Ti-6Al-4V was lower than cast iron and titanium Ti-13V-11Cr-3Al.

Downloads

Download data is not yet available.

Downloads

Published

10/16/2019

How to Cite

Design and Evaluate A Model of Vehicle Suspension System by Using Fem. (2019). SMART MOVES JOURNAL IJOSCIENCE, 5(10), 7-20. https://doi.org/10.24113/ijoscience.v5i10.231

Similar Articles

1-10 of 29

You may also start an advanced similarity search for this article.