Perform Thermal Analysis on the Deep Grove Ball Bearing for Different Materials to Enhance the Thermal Performance
DOI:
https://doi.org/10.24113/ijoscience.v8i2.471Keywords:
Ball-Bearing, Rollers, Optimizing Techniques; Rolling Contact Bearings; Substances Utilized.Abstract
The main objective of the present work to perform thermal analysis on the deep grove ball bearing for different materials to enhance the thermal performance, for that three dimensional CAD model of deep groove ball bearing of 110 mm outer diameter, 70 mm inner diameter of rolling balls diameter of 9.525 mm with 12 balls have been used to perform thermal analysis for the stainless steel, high carbon chromium steel, metal matrix (Ti-6Al-4 V-12TiC), GCr15 steel, silicon nitride (Si3N4) and Zirconium dioxide (ZrO2). Results show that heat flux in chromium steel is 4.3% more than stainless steel, titanium ally 25.34% more than chromium steel, CCr15 63.015% more than titanium alloy, metal matrix (Ti-6Al-4 V-12TiC) 28.97% more than GCr15 steel and zirconium dioxide & silicon nitride gives 1.57 times more than metal matrix and other materials. It has been also observed that zirconium dioxide & silicon nitride gives 6.07 times total heat flux more than stainless steel, 5.78 times more than chromium steel, 4.41 times more than titanium alloy, 2.32 times more than CCr15 and 1.57 times more than metal matrix. Hence zirconium dioxide & silicon nitride have better thermal performance.
Downloads
References
Dinh Sy Truong et al. (2021) “An analysis of a thermally affected high-speed spindle with angular contact ball bearings” Tribology International 157 (2021) 106881https://doi.org/10.1016/j.triboint.2021.106881
Miaomiao Li et al. (2021) “Temperature rise characteristics for angular-contact ball bearings with oil-air lubrication based on fluid-solid conjugate heat transfer” Advances in Mechanical Engineering 2021, Vol. 13(1) 1–13 DOI: 10.1177/1687814021990927
Shuai Gao et al. (2021) “Ball bearing skidding and over-skidding in large-scale angular contact ball bearings: Nonlinear dynamic model with thermal effects and experimental results” Mechanical Systems and Signal Processing 147 (2021) 107120 https://doi.org/10.1016/j.ymssp.2020.107120
V. Choubey & S. Agarwal (2021) “Heat Transfer Analysis of Ball Bearing for three different materials using ANSYS” European Journal of Advances in Engineering and Technology, 2021, 8(6):20-25 ISSN: 2394 - 658X
P.C. Santhosh Kumar et al (2020) “Heat transfer analysis for different materials of ball bearing using ANSYS” (2020) https://doi.org/10.1016/j.matpr.2020.10.944
Jialan Liu et al. (2020) “Thermal contact conductance between balls and bearing rings” International Communications in Heat and Mass Transfer 117 (2020) 104780 https://doi.org/10.1016/j.icheatmasstransfer.2020.104780.
Yu Wang et al (2020) “Study on the Thermal Performance and Temperature Distribution of Ball Bearings in the Traction Motor of a High-Speed EMU” applied sciences 2020, 10, 4373; doi:10.3390/app10124373.
Bei Yan et al. (2019) “Thermal coefficients modification of high speed ball bearing by multi-object optimization method” International Journal of Thermal Sciences 137 (2019) 313–324 https://doi.org/10.1016/j.ijthermalsci.2018.11.027
Dinh Sy Truong et al. (2019) “Thermally affected stiffness matrixof angular contact ball bearings in a high-speed spindle system” Advances in Mechanical Engineering 2019, Vol. 11(11) 1–17 https://us.sagepub.com/en-us/nam/open-access-at-sage
G. Srinubabu& K. Muralidhar (2019) “Design and Thermal Analysis of Ball Bearing using Various Materials on Finite Element Method” International Journal of Applied Sciences, Engineering and Management ISSN 2320 – 3439, Vol. 08, No. 05, September 2019, pp. 06-11
Clement Rabreau et al (2018) “Influence of bearing kinematics hypotheses on ball bearing heat generation” Procedia CIRP 77 (2018) 622–625 https://hal.archives-ouvertes.fr/hal-02012335
Xianwen Zhou et al. (2018) “Investigation on thermal behavior and temperature distribution of bearing inner and outer rings. Tribology” International (2018), doi: https://doi.org/10.1016/j.triboint.2018.09.031.
Abdullah Jamil et al. (2018) “Mathematical Modelling and Transient Thermal Analysis of Coupler-Rocker Bearing” UTP-UMP-VIT SES 2018, MATEC Web of Conferences 225, 04005 (2018) https://doi.org/10.1051/matecconf/201822504005.
Junning Li et al. (2018) “Study on the Thermal Distribution Characteristics of High-Speed and Light-Load Rolling Bearing Considering Skidding” Appl. Sci. 2018, 8, 1593; doi:10.3390/app8091593 www.mdpi.com/journal/applsci.
Xiaoping Li et al. (2018) “Analysis for Thermal Characteristics of High-Speed Angular Contact Ball Bearing under Different Preload” Advances in Computer Science Research, volume 83. 8th International Conference on Social Network, Communication and Education (SNCE 2018 pp 429-433.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Vinay Kumar Shukla, Prof. Jeetendra Mishra, Prof. Amit Singh, Prof Shamir Daniel
This work is licensed under a Creative Commons Attribution 4.0 International License.
IJOSCIENCE follows an Open Journal Access policy. Authors retain the copyright of the original work and grant the rights of publication to the publisher with the work simultaneously licensed under a Creative Commons CC BY License that allows others to distribute, remix, adapt, and build upon your work, even commercially, as long as they credit you for the original creation. Authors are permitted to post their work in institutional repositories, social media or other platforms.
Under the following terms:
-
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
