Load Switching Analysis using Converter with Optimization Algorithm in Hybrid Renewable Energy System


  • Shilpa Bharti
  • Abhishek Dubey






Recently, an increasing number of organizations have begun to view renewable energy and industries as opportunities rather than regulations in the context of their production, distribution, and services. In this paper, main objective of designing a grid integrated solar-wind hybrid energy system for driving loads for improving its reliability and efficiency. And the inverter control designing with an AI-based optimization algorithm to attain improved active power at the terminal of loading by reducing the losses. And Improvement in the reactive power output from the system by the inverter control by a designed hybrid system that can compensate the reactive power requirement when required. The active power output from the system has enhanced to 77860 W in the system having converter regulated from the proposed controller that is MF_DEH from 77230 as a result of improved performance and reduced losses. The system was first compared with the PI-directed inverter control and the THD% in current, as well as voltage waveform, was found to be reduced to 0.11% in voltage and 0.41% in current from 0.86% and 1.93% respectively.


Download data is not yet available.

Author Biographies

Shilpa Bharti

M. Tech Scholar

Bhopal Institute of Technology and Science (BITS)

Bhopal (M.P), India

Abhishek Dubey

Assistant professor

Bhopal Institute of Technology and Science (BITS)

Bhopal (M.P), India


B. Venkatasamy, L. Kalaivani “Modeling and Power Quality Analysis of Grid-Connected PV Inverter with Active and Reactive Power Injection Mode”, Journal of Electrical Engineering & Technology 2021.

P.R. Prakash, B. Venkatasamy, L. Kalaivani “Performance Analysis of Grid- Tie Inverter for Reactive Power Injection Mode in Hybrid Wind Solar Energy System”, 2018 2nd International Conference on Trends in Electronics and Informatics (ICOEI), DOI:10.1109/ICOEI.2018.8553869.

Ahmadi S, Abdi S (2016) “Application of the hybrid big bang-big crunch algorithm for optimal sizing of a standalone hybrid P.V./wind/battery system”. Sol Energy 134:366–374.

Aissou S, Rekioua D, Mezzai N, Rekioua T, Bacha S (2015) “Modeling and control of hybrid photovoltaic wind power system with battery storage”. Energy Convers Manag 89:615–625.

Alnejaili T, Drid S, Mehdi D, Chrifi-Alaoui L, Belarbi R, Hamdouni A (2015) “Dynamic control and advanced load management of a standalone hybrid renewable power system for remote housing”. Energy Convers Manag 105:377–392.

Belmili H, Boulouma S, Boualem B, Fayçal A (2017) “Optimized control and sizing of standalone PV-wind energy conversion system”. Energy Procedia 107:76–84.

Bilal B, Sambou V, Kébé C, Ndiaye P, Ndongo M (2012) “Methodology to size an optimal standalone P.V./wind/diesel/battery system minimizing the levelized cost of energy and the CO2 emissions”. Energy Procedia 14:1636–1647.

Dufo-López R, Fernández-Jiménez L, Ramírez-Rosado I, Artal-Sevil J, Domínguez-Navarro J, Bernal-Agustín J (2017) “Daily operation optimisation of hybrid stand-alone system by model predictive control considering ageing model”. Energy Convers Manag 134:167–177.

Dali M, Belhadj J, Roboam X (2010) “Hybrid solar-wind system with battery storage operating in grid-connected and standalone mode: control and energy management–experimental investigation”. Energy 35(6):2587–2595.

Gupta R, Kumar R, Bansal A (2015) “BBO-based small autonomous hybrid power system optimization incorporating wind speed and solar radiation forecasting”. Renew Sustain Energy Rev 41:1366–1375.




How to Cite

Bharti, S. ., & Dubey, A. . (2021). Load Switching Analysis using Converter with Optimization Algorithm in Hybrid Renewable Energy System. SMART MOVES JOURNAL IJOSCIENCE, 7(6), 14–23. https://doi.org/10.24113/ijoscience.v7i6.390