Heat Transfer Analysis During Quenching of Plate Roller in Quenching Machine Using CFD
DOI:
https://doi.org/10.24113/ijo-science.v5i6.240Abstract
A computational fluid dynamics analysis of steel plate using volume of fluid multiphase model moving at different velocity i.e. 0.1 to 1 m/sec with 0.1 m/sec interval. From the above concluding points it has been observed that heat flux increased for the steel plate moving at 0.1 m/sec. During quenching process the surface heat transfer coefficient increases at first. And when plate surface temperature is nearly 420 oC, surface heat transfer coefficients reach the maximum value of about 15000 W/(m2K). And then, The calculated heat transfer coefficients are applied to analyze plate temperature field of different thicknesses, and the difference between the calculated and measured temperature is less than 35 %.
Downloads
Downloads
Published
Issue
Section
License
Copyright (c) 2019 Sanskar singh, vandana singh, kajol kumari
This work is licensed under a Creative Commons Attribution 4.0 International License.
IJOSCIENCE follows an Open Journal Access policy. Authors retain the copyright of the original work and grant the rights of publication to the publisher with the work simultaneously licensed under a Creative Commons CC BY License that allows others to distribute, remix, adapt, and build upon your work, even commercially, as long as they credit you for the original creation. Authors are permitted to post their work in institutional repositories, social media or other platforms.
Under the following terms:
-
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
