Comparative Analysis of Different Designs of Triple Tube Heat Exchangers on the Basis of their Performances

Authors

  • Vivek Kumar Gautam
  • Prof. NK Sagar

DOI:

https://doi.org/10.24113/ijoscience.v8i3.474

Keywords:

Heat exchanger, Shell and Tube Heat Exchanger, Triple tube Heat Exchangers.

Abstract

Cooling, warming, and air-conditioning systems, electric utilities, chemical based processing structures, food industry, automotive vehicle radiators, and waste heat recovery units are all examples of heat exchanger implementations. Heat exchangers in power plants include air preliminary heaters, economizers, evaporators, super-heaters, condensing systems, and cooling towers. Theoretical and simulation fluid dynamics assessments of varying patterns of a concentric TTHEX were conducted in this study with the intent of enhancing thermal efficiency.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Author Biographies

Vivek Kumar Gautam

M.Tech Scholar

Department of Mechanical Engineering

Sagar Institute of Research & Technology
Bhopal, M.P, India

Prof. NK Sagar

Assistant Professor

Department of Mechanical Engineering

Sagar Institute of Research & Technology
Bhopal, M.P, India

References

Bahiraei, M., Mazaheri, N., &Rizehvandi, A. (2019). Application of a hybrid nanofluid containing graphene nanoplatelet–platinum composite powder in a triple-tube heat exchanger equipped with inserted ribs. Applied Thermal Engineering, 149, 588–601. https://doi.org/10.1016/j.applthermaleng.2018.12.072 DOI: https://doi.org/10.1016/j.applthermaleng.2018.12.072

Said, Z., Rahman, S. M. A., El Haj Assad, M., &Alami, A. H. (2019). Heat transfer enhancement and life cycle analysis of a Shell-and-Tube Heat Exchanger using stable CuO/water nanofluid. Sustainable Energy Technologies and Assessments, 31(December 2018), 306–317. https://doi.org/10.1016/j.seta.2018.12.020 DOI: https://doi.org/10.1016/j.seta.2018.12.020

Karimi, A., Al-Rashed, A. A. A. A., Afrand, M., Mahian, O., Wongwises, S., &Shahsavar, A. (2019). The effects of tape insert material on the flow and heat transfer in a nanofluid-based double tube heat exchanger: Two-phase mixture model. International Journal of Mechanical Sciences, 156(December 2018), 397–409. https://doi.org/10.1016/j.ijmecsci.2019.04.009 DOI: https://doi.org/10.1016/j.ijmecsci.2019.04.009

Mahdi, J. M., Lohrasbi, S., Ganji, D. D., &Nsofor, E. C. (2019). Simultaneous energy storage and recovery in the triplex-tube heat exchanger with PCM, copper fins and Al2O3 nanoparticles. Energy Conversion and Management, 180(May 2018), 949–961. https://doi.org/10.1016/j.enconman.2018.11.038 DOI: https://doi.org/10.1016/j.enconman.2018.11.038

Nakhchi, M. E., &Esfahani, J. A. (2018). Cu-water nanofluid flow and heat transfer in a heat exchanger tube equipped with cross-cut twisted tape. In Powder Technology (Vol. 339). Elsevier B.V. https://doi.org/10.1016/j.powtec.2018.08.087 DOI: https://doi.org/10.1016/j.powtec.2018.08.087

Bahiraei, M., KianiSalmi, H., &Safaei, M. R. (2019). Effect of employing a new biological nanofluid containing functionalized graphene nanoplatelets on thermal and hydraulic characteristics of a spiral heat exchanger. Energy Conversion and Management, 180(October 2018), 72–82. https://doi.org/10.1016/j.enconman.2018.10.098 DOI: https://doi.org/10.1016/j.enconman.2018.10.098

Sheikholeslami, M., Rezaeianjouybari, B., Darzi, M., Shafee, A., Li, Z., & Nguyen, T. K. (2019). Application of nano-refrigerant for boiling heat transfer enhancement employing an experimental study. International Journal of Heat and Mass Transfer, 141, 974–980. https://doi.org/10.1016/j.ijheatmasstransfer.2019.07.043 DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.07.043

Sajawal, M., Rehman, T. U., Ali, H. M., Sajjad, U., Raza, A., & Bhatti, M. S. (2019). Experimental thermal performance analysis of finned tube-phase change material based double pass solar air heater. Case Studies in Thermal Engineering, 15, 100543. https://doi.org/10.1016/j.csite.2019.100543 DOI: https://doi.org/10.1016/j.csite.2019.100543

Shafieian, A., Khiadani, M., &Nosrati, A. (2019). Thermal performance of an evacuated tube heat pipe solar water heating system in cold season. Applied Thermal Engineering, 149(December 2018), 644–657. https://doi.org/10.1016/j.applthermaleng.2018.12.078 DOI: https://doi.org/10.1016/j.applthermaleng.2018.12.078

Elbahjaoui, R., El Qarnia, H., &Naimi, A. (2018). Thermal performance analysis of combined solar collector with triple concentric-tube latent heat storage systems. Energy and Buildings, 168, 438–456. https://doi.org/10.1016/j.enbuild.2018.02.055 DOI: https://doi.org/10.1016/j.enbuild.2018.02.055

Jagirdar, M., & Lee, P. S. (2018). Mathematical modeling and performance evaluation of a desiccant coated fin-tube heat exchanger. Applied Energy, 212(December 2017), 401–415. https://doi.org/10.1016/j.apenergy.2017.12.038 DOI: https://doi.org/10.1016/j.apenergy.2017.12.038

Akyürek, E. F., Geli?, K., ?ahin, B., &Manay, E. (2018). Experimental analysis for heat transfer of nanofluid with wire coil turbulators in a concentric tube heat exchanger. Results in Physics, 9, 376–389. https://doi.org/10.1016/j.rinp.2018.02.067 DOI: https://doi.org/10.1016/j.rinp.2018.02.067

Mahdi, J. M., Lohrasbi, S., Ganji, D. D., &Nsofor, E. C. (2018). Accelerated melting of PCM in energy storage systems via novel configuration of fins in the triplex-tube heat exchanger. International Journal of Heat and Mass Transfer, 124, 663–676. https://doi.org/10.1016/j.ijheatmasstransfer.2018.03.095 DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2018.03.095

Downloads

Published

03/03/2022

How to Cite

Gautam, V. K., & Sagar, P. N. . (2022). Comparative Analysis of Different Designs of Triple Tube Heat Exchangers on the Basis of their Performances. SMART MOVES JOURNAL IJOSCIENCE, 8(3), 1–7. https://doi.org/10.24113/ijoscience.v8i3.474

Issue

Section

Articles