CFD Assessment of Circular and Spiral Recipients in CSP Plants

Authors

  • Chandresh Kumar Lodha
  • Prof. Pankaj Badgaiyan

DOI:

https://doi.org/10.24113/ijoscience.v8i1.463

Abstract

The primary goal of this research is to create a new billboard-style central spherical solar receiver with varying header and tube diameter, for which two spiral central receiver designs and a new circular central solar receiver with varying pipe radius and varying mass circulation are utilized. The exhaust temperature of the water was determined employing a computational fluid dynamics assessment employing ANSYS Fluent. Following the verification of the standards models, a novel central solar receiver project was made that accomplishes computational fluid dynamics assessment with almost the same boundary condition.The heat export fluid is water, and the spiral coil tube is copper. The mass circulation rate varies among 0.1 LPM, 0.2 LPM, and 0.3 LPM, with the inlet temperature of water being 299K at continuous solar irradiation. The findings demonstrate that at 0.1 LPM, the redesign of the central solar receiver produces a temperature of 383.9 K, which is 28.39 percent higher than the inlet temperature and 7.32 percent higher than the spiral central receiver. As a consequence, the circular central solar recipient to varying pipe radius is suggested and considered in upcoming usages

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Author Biographies

Chandresh Kumar Lodha

M.Tech Scholar

Truba Institute of Engineering &Information Technology

Bhopal, M.P, India

Prof. Pankaj Badgaiyan

Assistant Professor

Truba Institute of Engineering &Information Technology

Bhopal, M.P, India

References

J. Lilliestam et al., “Policies to keep and expand the option of concentrating solar power for dispatchable renewable electricity,” Energy Policy, vol. 116, pp. 193–197, May 2019. DOI: https://doi.org/10.1016/j.enpol.2018.02.014

M.Cagnoli et al. “A CFD-supported dynamic system-level model of a sodium-cooled billboard-type receiver for central tower CSP applications” Solar Energy, Volume 177, 1 January 2019, Pages 576-594. DOI: https://doi.org/10.1016/j.solener.2018.11.031

Alhusseinalbarbar and Abdullah arar, “Performance Assessment and Improvement of Central Receivers Used for Solar Thermal Plants” 25 June 2019 DOI: https://doi.org/10.3390/en12163079

A.L.Avila-Marinaet al. “Modelling strategies for porous structures as solar receivers in central receiver systems: A review” Renewable and Sustainable Energy Reviews Volume 111, September 2019, Pages 15-33. DOI: https://doi.org/10.1016/j.rser.2019.03.059

G. Picotti, P. Borghesani, G. Manzolini, M. E. Cholette, and R. Wang, “Development and experimental validation of a physical model for the soiling of mirrors for CSP industry applications,” Sol. Energy, vol. 173, pp. 1287–1305, Oct. 2018. DOI: https://doi.org/10.1016/j.solener.2018.08.066

S. Riahi, W. Y. Saman, F. Bruno, M. Belusko, and N. H. S. Tay, “Performance comparison of latent heat storage systems comprising plate fins with different shell and tube configurations,” Appl. Energy, vol. 212, pp. 1095–1106, Feb. 2018. DOI: https://doi.org/10.1016/j.apenergy.2017.12.109

Daabo, A. Ahmad, S. Mahmoud, and R. K. AlDadah, “Parametric analysis of small scale cavity receiver with optimum shape for solar powered closed Brayton cycle applications,” Appl. Therm. Eng., vol. 122, pp. 626–641, Jul. 2017. DOI: https://doi.org/10.1016/j.applthermaleng.2017.03.093

Y-L. He, K. Wang, Y. Qiu, B-C. Du, Q. Liang, S. Du, Review of the solar flux distribution in concentrated solar power: non-uniform features, challenges, and solutions, Applied Thermal Engineering (2018), doi: https://doi.org/10.1016/j.applthermaleng.2018.12.006 DOI: https://doi.org/10.1016/j.applthermaleng.2018.12.006

F. Fornarelli et al., “CFD analysis of melting process in a shell-and-tube latent heat storage for concentrated solar power plants,” Appl. Energy, vol. 164, pp. 711–722, Feb. 2016. DOI: https://doi.org/10.1016/j.apenergy.2015.11.106

K.Nithyanandam and R.Pitchumani, “Thermal and structural investigation of tubular supercritical carbon dioxide power tower receivers” Solar Energy Volume 135, October 2016, Pages 374-385. DOI: https://doi.org/10.1016/j.solener.2016.05.039

Alberto Sanchez-Gonzalez and Domingo Santana, “Solar flux distribution on central receivers: A projection method from analytic function” February 2015. DOI: https://doi.org/10.1016/j.renene.2014.08.016

Nan Wanget al. “Numerical study of flat plate solar collector with novel heat collecting components” International Communications in Heat and Mass Transfer, Volume 69, December 2015, Pages 18-22. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2015.10.012

X. Meng, X. Xia, C. Sun, and X. Hou, “Adjustment, error analysis and modular strategy for Space Solar Power Station,” Energy Convers. Manag., vol. 85, pp. 292–301, 2014. DOI: https://doi.org/10.1016/j.enconman.2014.05.070

L. El-Katiri, A roadmap for renewable energy in the Middle East and North Africa. Oxford institute for energy studies, 2014. DOI: https://doi.org/10.26889/9781907555909

T. Li, R. Wang, J. Kiplagat, and Y. Kang, “Performance analysis of an integrated energy storage and energy upgrade thermochemical solid– gas sorption system for seasonal storage of solar thermal,” Energy, vol. 50, pp. 454–467, 2013 DOI: https://doi.org/10.1016/j.energy.2012.11.043

Omar Behar et al. “A review of studies on central receiver solar thermal power plants” Renewable and Sustainable Energy Reviews, Volume 23, July 2013, Pages 12-39. DOI: https://doi.org/10.1016/j.rser.2013.02.017

Y. Bai,1 T. T. Chow,1 C. Ménézo,2,3 and P. Dupeyrat, “Analysis of a Hybrid PV/Thermal Solar-Assisted Heat Pump System for Sports Center Water Heating Application“, 9 August 2012. DOI: https://doi.org/10.1155/2012/265838

Daishi Takahashi, Koichi Nakata, Yasushi Yoshihara, “Engine Thermal Control for Improving the Engine Thermal Efficiency and Anti-Knocking Quality”, 2012. DOI: https://doi.org/10.4271/2012-01-0377

Downloads

Published

01/28/2022

How to Cite

Lodha, C. K. ., & Badgaiyan, P. P. . (2022). CFD Assessment of Circular and Spiral Recipients in CSP Plants. SMART MOVES JOURNAL IJOSCIENCE, 8(1), 28–34. https://doi.org/10.24113/ijoscience.v8i1.463

Issue

Section

Articles