Techniques used in Evaluating Performance of Solar Air Heater (SAH) Comprised of Winglet Type Roughness- A Review

Authors

  • Ravi Ranjan
  • Prof. Shravan Vishwakarma
  • Prof. Pankaj Badgaiyan

DOI:

https://doi.org/10.24113/ijoscience.v7i11.425

Keywords:

SAH, types of roughness, winglet type roughness

Abstract

There are multiple resource of energies but if we talk about renewable energy then solar energy is one of the renewable energy which is in demand because it is feasible and cheap.  Flat - plate solar air heaters (SAHs) are simplistic and stylish, and their heating pathway of implementation requires care and support. increasing Room temperature, elimination of moist from farm commodities, increasing temperature of industrialized goods, hardening of wood or timber, and other uses for SAHs are frequent. well there are several issues in SAH, but the biggest issues with the SAH is its ineffectiveness, which is caused by atmosphere's lower heat transferring ability. We present introduces on the work performed by a lot of scientists to boost the effectiveness of solar air heaters (SAHs) with various kinds of roughness area in this research article.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Author Biography

Ravi Ranjan

M. Tech Scholar

Department of Mechanical Engineering

Truba Institute Of Engineering & Information Technology

 Bhopal, M.P, India

References

Kumar, P. G., Sakthivadivel, D., Balaji, K., Salman, M., & Kim, S. C. (2021). Performance enhancement of a double-pass solar air heater with a shot-blasted absorber plate and winglets. Journal of Mechanical Science and Technology, 35(6), 2743–2753. https://doi.org/10.1007/s12206-021-0544-x DOI: https://doi.org/10.1007/s12206-021-0544-x

Jain, S. K., Agrawal, G. Das, & Misra, R. (2019). A detailed review on various V-shaped ribs roughened solar air heater. Heat and Mass Transfer/Waerme- Und Stoffuebertragung, 55(12), 3369–3412. https://doi.org/10.1007/s00231-019-02656-4 DOI: https://doi.org/10.1007/s00231-019-02656-4

Dezan, D. J., Rocha, A. D., Salviano, L. O., & Ferreira, W. G. (2020). Thermo-hydraulic optimization of a solar air heater duct with non-periodic rows of rectangular winglet pairs. Solar Energy, 207(April), 1172–1190. https://doi.org/10.1016/j.solener.2020.06.112 DOI: https://doi.org/10.1016/j.solener.2020.06.112

Promvonge, P., & Skullong, S. (2020). Enhanced heat transfer in rectangular duct with punched winglets. Chinese Journal of Chemical Engineering, 28(3), 660–671. https://doi.org/10.1016/j.cjche.2019.09.012 DOI: https://doi.org/10.1016/j.cjche.2019.09.012

Maithani, R., Chamoli, S., Kumar, A., & Gupta, A. (2019). Solar air heater duct roughened with wavy delta winglets: correlations development and parametric optimization. Heat and Mass Transfer/Waerme- Und Stoffuebertragung, 55(12), 3473–3491. https://doi.org/10.1007/s00231-019-02651-9 DOI: https://doi.org/10.1007/s00231-019-02651-9

Koolnapadol, N., Promvonge, P., & Skullong, S. (2020). Performance evaluation of solar receiver heat exchanger with rectangular-wing vortex generators. International Journal of Mechanical Engineering and Robotics Research, 9(1), 130–135. https://doi.org/10.18178/ijmerr.9.1.130-135 DOI: https://doi.org/10.18178/ijmerr.9.1.130-135

Arunkumar, H. S., Vasudeva Karanth, K., & Kumar, S. (2020). Review on the design modifications of a solar air heater for improvement in the thermal performance. Sustainable Energy Technologies and Assessments, 39(March), 100685. https://doi.org/10.1016/j.seta.2020.100685 DOI: https://doi.org/10.1016/j.seta.2020.100685

Sawhney, J. S., Maithani, R., & Chamoli, S. (2017). Experimental investigation of heat transfer and friction factor characteristics of solar air heater using wavy delta winglets. Applied Thermal Engineering, 117, 740–751. https://doi.org/10.1016/j.applthermaleng.2017.01.113 DOI: https://doi.org/10.1016/j.applthermaleng.2017.01.113

Skullong, S., Promvonge, P., Thianpong, C., Jayranaiwachira, N., & Pimsarn, M. (2017). Heat transfer augmentation in a solar air heater channel with combined winglets and wavy grooves on absorber plate. Applied Thermal Engineering, 122, 268–284. https://doi.org/10.1016/j.applthermaleng.2017.04.158 DOI: https://doi.org/10.1016/j.applthermaleng.2017.04.158

Skullong, S., Promthaisong, P., Promvonge, P., Thianpong, C., & Pimsarn, M. (2018). Thermal performance in solar air heater with perforated-winglet-type vortex generator. Solar Energy, 170(August 2017), 1101–1117. https://doi.org/10.1016/j.solener.2018.05.093 DOI: https://doi.org/10.1016/j.solener.2018.05.093

Perwez, A., & Kumar, R. (2019). Thermal performance investigation of the flat and spherical dimple absorber plate solar air heaters. Solar Energy, 193(September), 309–323. https://doi.org/10.1016/j.solener.2019.09.066 DOI: https://doi.org/10.1016/j.solener.2019.09.066

Downloads

Published

11/20/2021

How to Cite

Ranjan, R. ., Vishwakarma, P. S., & Badgaiyan , P. P. . (2021). Techniques used in Evaluating Performance of Solar Air Heater (SAH) Comprised of Winglet Type Roughness- A Review. SMART MOVES JOURNAL IJOSCIENCE, 7(11), 46–51. https://doi.org/10.24113/ijoscience.v7i11.425