Thermal Analysis of Cylindrical Parabolic Trough Collector Using Particle Swarm Optimization

Authors

  • Manoj Kumar Kushwaha
  • Anup Kumar Rajak

DOI:

https://doi.org/10.24113/ijoscience.v7i11.418

Keywords:

Particle swarm optimization, Solar collector, nanofluid and CPTC

Abstract

For about the first instance, a revolutionary Multi-objective Particle Swarm Optimization (PSO) method is applied to achieve a relatively close CPTC design for improving batter thermal performance and output warmth. Optimized design of parabolic trough collectors serves an important part in today's marketplace and is a rising area of concern for experts and academics. Particle swarm optimization (PSO) is an unique approach for enhancing a solar power trough collector's heat transfer analysis. Nanofluid has received a lot of interest as a way to increase convective heat transfer. They surpassed the previously used fluid. The thermal conductivity and convection temperature transfer coefficients are increased by employing nanofluid as the heat transport fluid and changing the base fluid. Particle concentration, thermal dispersion consistency, and nanofluid dimension are the important parameters for enhancing thermal conductivity, according to a prior study. As a preliminary step, keep these points in mind. Except perhaps the concentration fluid intake velocity and pipe diameter, the optimal solution value is determined using the tested model characteristics and the Dimethyl Polysiloxane Molecular as a base fluid. The results are exhibited at different temperatures. To determine if the recommended solution approach is appropriate, the outcomes of two research publications are compared

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Author Biographies

Manoj Kumar Kushwaha

M.Tech Scholar

Department of Mechanical Engineering

Mittal College of Technology

Bhopal, Madhya Pradesh, India

Anup Kumar Rajak

Assistant Professor

Rewa Engineering College

Rewa, Madhya Pradesh, India

References

climateinterpreter.org/content/why-energy-important

media.springernature.com/full/springer-static/image/art%3A10.1186%2Fs40486-015-0014-2/MediaObjects/40486_2015_14_Fig10_HTML.gif

Manoj Kumar Kushwaha*1, Dr. Anup Kumar Rajak*2, Dr. Amit Sahay*, “THERMAL ANALYSIS OF CYLINDRICAL PARABOLIC TROUGH COLLECTOR THROUGH PARTICLE SWARM OPTIMIZATION” October 2021

Anish Malana and K.Ravi Kumara, “A comprehensive review on optical analysis of parabolic trough solar collector” August 2021 DOI: https://doi.org/10.1016/j.seta.2021.101305

Oveepsa Chakrabortya Bipla Das Rajat Gupta and Sumita Debbarma “Heat transfer enhancement analysis of parabolic trough collector with straight and helical absorber tube” December 2020 DOI: https://doi.org/10.1016/j.tsep.2020.100718

Anish Malan,Ravi Kumar K, “Coupled optical and thermal analysis of large aperture parabolic trough solar collector” 24 october 2020 DOI: https://doi.org/10.1002/er.6128

Mohammad Marefati, Mehdi Mehrpooya, Mohammad Behshad Shafi, “Optical and thermal analysis of a parabolic trough solar collector for production of thermal energy in different climates in Iran with comparison between the conventional nanofluids” “ 20 February 2018 DOI: https://doi.org/10.1016/j.jclepro.2017.12.080

Mariella Mateo1, Rodolfo Echarri2,3, Inna Samsón, “Thermal Analysis and Experimental Validation of Parabolic Trough Collector for Solar Adsorption Refrigerator” October 2017

Hanjiang Song, Lingen Chena), and Fengrui Sun, “Optimal expansion of a heated working fluid for maximum work output with generalized radiative heat transfer law” November 2007 DOI: https://doi.org/10.1063/1.2802187

Downloads

Published

11/10/2021

How to Cite

Kushwaha, M. K. ., & Rajak, A. K. . (2021). Thermal Analysis of Cylindrical Parabolic Trough Collector Using Particle Swarm Optimization. SMART MOVES JOURNAL IJOSCIENCE, 7(11), 6–10. https://doi.org/10.24113/ijoscience.v7i11.418