A Review of Solar Still Assessment with Various PCM Materials
Keywords:PCM, CFD, solar still, TSS
Solar distillation purifies water by transferring sun's heat to a simple device. A shallow basin with a glass shield makes up the majority of the system, which is usually referred to as a solar even now. Evaporation takes place when the pool water is heated by the sun. Humidity rises, condenses on the shield, and drips into a drip tray, leaving salts, minerals, as well as the majority of contaminants behind. The oceans, that have a high salinity, are now the only nearly inexhaustible source of water supply.Separating salts from seawater, on the other hand, necessitates a huge amount of energy, that also, when derived from fossil fuels, can be destructive to the environment. As a result, desalination of seawater must be done using environmentally friendly energy sources. PCM which are solar, are widely used to store solar radiation during the day and release it in the evening, in a wide range of solar applications
A. Ahsan, M. Imteaz, U. A. Thomas, M. Azmi, A. Rahman, and N. N. Nik Daud, “Parameters affecting the performance of a low cost solar still,” Appl. Energy, vol. 114, pp. 924–930, 2014, doi: 10.1016/j.apenergy.2013.08.066. DOI: https://doi.org/10.1016/j.apenergy.2013.08.066
C.Gnanavel, R.Saravanan, M.Chandrasekaran “CFD analysis of solar still with PCM”, IEEE Materials Today: Proceedings, Volume 37, Part 2, 2021, Pages 694-700. DOI: https://doi.org/10.1016/j.matpr.2020.05.638
PratibhaKuraria, Tanya Saxena, Amrit Kumar Dhamneya “Solar Still Performance Enhancement using PCM & Nanoparticles”, International Research Journal of Engineering and Technology (IRJET), Volume: 07 Issue: 08 | Aug 2020.
Farhan Lafta Rashid, Abbas SahiShareef “Performance Enhancement of a New Passive Solar Still Design for Water Desalination”, IEEE Journal of Mechanical Engineering Research and Developments ISSN: 1024-1752, Vol. 43, No. 3, pp. 75-85 Published Year 2020.
Swellam W. Sharshir, Ammar H. Elsheikh, Elbager M.A. Edreis “Improving the solar still performance by using thermal energy storage materials: A review of recent developments”, Desalination and Water Treatment, 165 (2019) 1–15 October DOI: https://doi.org/10.5004/dwt.2019.24362
C Uma Maheswari and R Meenakshi Reddy “CFD Analysis of different types of single basin solar stills”, IOP Conf. Series: Materials Science and Engineering 330 (2018) 012097. DOI: https://doi.org/10.1088/1757-899X/330/1/012097
Ali Saeed M M, Mohsen MS, Hachim D M, Hameed H G (2019) “numerical simulation for single slope solar still performance with optimal amount of nano PCM”. Journal of advanced Res in Fluid Mech and Thermal Sci, 63, 302-316.
Elashmawy, M. (2017). “An experimental investigation of a parabolic concentrator solar tracking system integrated with a tubular solar still”. Desalination, 411, 1-8. DOI: https://doi.org/10.1016/j.desal.2017.02.003
Kabeel, A. E., Sharshir, S. W., Abdelaziz, G. B., Halim, M. A., &Swidan, A. (2019). “Improving performance of tubular solar still by controlling the water depth and cover cooling”. Journal of cleaner production, 233, 848-856. DOI: https://doi.org/10.1016/j.jclepro.2019.06.104
Hussein Ali Jabar, “Experimental and theoretical study of performance of tubular solar still in iraq,” no. June, 2016.
N. Khan, S. Dilshad, R. Khalid, A.R. Kalair, N. Abas, Review of energy storage and transportation of energy, Energy Storage 1 (2019) 1–49, https://doi.org/10.1002/ est2.49. DOI: https://doi.org/10.1002/est2.49
L.G. Socaciu, Thermal energy storage with phase change material, leonardo electron, J. Pract. Technol. 11 (2012) 75–98.
A.F. Mohamed, A.A. Hegazi, G.I. Sultan, E.M.S. El-Said, Augmented heat and mass transfer effect on performance of a solar still using porous absorber: experimental investigation and exergetic analysis, Appl. Therm. Eng. 150 (2019) 1206–1215, https://doi.org/10.1016/j.applthermaleng.2019.01.070. DOI: https://doi.org/10.1016/j.applthermaleng.2019.01.070
M.R. Kumar, M. Sridhar, S.M. Kumar, C.V. Vasanth, Experimental investigation of solar water desalination with phase change material and tio 2, Imp. J. Interdiscip. Res. (2017) 1128–1134 doi:ISSN: 2454-1362.
A.R.A. Elbar, M.S. Yousef, H. Hassan, Energy, exergy, exergoeconomic and enviroeconomic (4E) evaluation of a new integration of solar still with photovoltaic panel, J. Clean. Prod. 233 (2019) 665–680, https://doi.org/10.1016/j.jclepro. 2019.06.111. DOI: https://doi.org/10.1016/j.jclepro.2019.06.111
B. Kanimozhi, K. Harish, B.S. Tarun, P.S. Sainath Reddy, P.S. Sujeeth, Charging and discharging processes of thermal energy storage system using phase change materials, IOP Conf. Ser. Mater. Sci. Eng. 197 (2017), https://doi.org/10.1088/ 1757-899X/197/1/012040. DOI: https://doi.org/10.1088/1757-899X/197/1/012040
J. Hu, T. Guo, Y. Zhu, R. Hu, X. Luo, T. Cheng, Effect of melting temperature and amount of the phase change material (PCM) on thermal performance of hybrid heat sinks, Proc. Electron. Packag. Technol. Conf. EPTC. (2014) 48–52, https:// doi.org/10.1109/ICEPT.2014.6922584. DOI: https://doi.org/10.1109/ICEPT.2014.6922584
Z. Andrassy, Z. Szanthó, Thermal behaviour of materials in interrupted phase change, J. Therm. Anal. Calorim. 138 (2019) 3915–3924, https://doi.org/10. 1007/s10973-019-08541-w. DOI: https://doi.org/10.1007/s10973-019-08541-w
A. Shukla, K. Kant, A. Sharma, Solar still with latent heat energy storage: a review, Innov. Food Sci. Emerg. Technol. 41 (2017) 34–46, https://doi.org/10.1016/j. ifset.2017.01.004 DOI: https://doi.org/10.1016/j.ifset.2017.01.004
How to Cite
Copyright (c) 2021 Pradeep Sen, Prof. Pankaj Badgaiyan, Prof. Bharat Girdhani, Prof. Shamir Daniel
This work is licensed under a Creative Commons Attribution 4.0 International License.
IJOSCIENCE follows an Open Journal Access policy. Authors retain the copyright of the original work and grant the rights of publication to the publisher with the work simultaneously licensed under a Creative Commons CC BY License that allows others to distribute, remix, adapt, and build upon your work, even commercially, as long as they credit you for the original creation. Authors are permitted to post their work in institutional repositories, social media or other platforms.
Under the following terms:
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.