Performance Analysis of UPQC Architecture at Different Load Conditions
DOI:
https://doi.org/10.24113/ijoscience.v7i8.408Keywords:
PCC, UPQC, PQ, DC.Abstract
The UPQC has the ability to improve the network quality at the installation site in electrical distribution networks or industrial electrical networks. The main objective of this thesis is to design a system to improve the network quality with a simplified architecture to support reactive power as well as to improve the active power available for load connections and to improve the efficiency of the system controls mentioned above. From this work, it was deduced that by developing and the inverter system with an control strategy in SVPWM, the device are proposed to improve the quality of the network can serve this goal with better results in the terms of performance and the efficiency. In this architecture can also be used in the hybrid systems, in making it more reliable. The designed system is also suitable for the delivery of different types of loads, such as non-linear load, symmetrical load, and asymmetrical load.
Downloads
References
Anirudh Sharma, Shailendra Kumar Sharma “Unified Power Quality Conditioner Analysis Design and Control”, Conference Record of the IEEE Industry Applications Society Annual Meeting (IAS), 2018.
Pedro Melin, Jose Espinoza “Analysis, Design and Control of a Unified Power-Quality Conditioner Based on a Current-Source Topology”, October 2012 IEEE Transactions 27;4:1727-1736.
N Khan, Engr Muhammad Shakeel “Design of a Unified Power Quality Conditioner”, December 2016International Journal of Science and Research;IJSR;5;59.
B.Sasikala, Khamruddin Syed “Design and Control of Interline Unified Power Quality Conditioner for Power Quality Disturbances”, IJERT;01;10;December 2012.
T. M. Thamizh Thentral, R. Jegatheesan “Unified power quality conditioner with reduced switch topology for distributed networks”, Wireless Networks;27;909–923;2021.
YavariM., Edjtahed, A non-linear controller design for UPQC in distribution systems. AEJ57,3387–3404,2018.
Chandra. Khadkikar,. UPQC-S: A novel concept of simultaneous voltage sag/swell and load reactive power compensations utilizing series inverter of UPQC. IEEE Transaction, 26;9, 2414–2425,2011.
Khadkikar, V.. Enhancing electric power quality using UPQC: A comprehensive overview. IEEE Transactions, 27;5;, 2284–2297;2012.
Priyavarthini, Nagamani, & Asha Rani. An improved control for simultaneous sag/swell mitigation and reactive power support in a grid-connected wind farm with DVR. IJEPES;101, 38–49, 2018.
Kesler,M., & Ozdemir, Synchronous-reference-frame-based control method forUPQC under unbalanced and distorted load conditions. IEEE Transactions;58;9, 3967–3975;2011.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Sikandra Kumar Mandal, Nishi Singh

This work is licensed under a Creative Commons Attribution 4.0 International License.
IJOSCIENCE follows an Open Journal Access policy. Authors retain the copyright of the original work and grant the rights of publication to the publisher with the work simultaneously licensed under a Creative Commons CC BY License that allows others to distribute, remix, adapt, and build upon your work, even commercially, as long as they credit you for the original creation. Authors are permitted to post their work in institutional repositories, social media or other platforms.
Under the following terms:
-
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.