A Review on Steel Structural Analysis for Optimization of Trusses

Authors

  • Babar Hussain Department of Civil Engineering, Sri Satya Sai University of Technology & Medical Science, Bhopal. M.P, India
  • Dr Ajay Swarup Department of Civil Engineering, Sri Satya Sai University of Technology & Medical Science, Bhopal, M.P, India

DOI:

https://doi.org/10.24113/ijoscience.v3i6.38

Keywords:

Steel Structure, Truss, Optimization, Staad.Pro

Abstract

 Integrated structural analysis and design software packages, which generally work on finite element method for analysis and design, have been gaining popularity in the field of designing since they have reduced the tedious calculation process to a simple process of just giving input values. The result generated is according to the values entered without the consideration of the feasibility. Moreover, optimization of structures has been a lesser used concept in day-to-day working and is independent of design and analysis of the structures. This paper provides a study of various levels of research work done in computational structural analysis. The crust of our review focuses on the analysis of optimization of truss, complex or simple because truss is the most widely used and fundamental building block of any structure.

Downloads

Download data is not yet available.

References

S. K. Duggal “Limit State Design of steel structure”.

N. Subramanian “Design of Steel Structures”

C. M. Meera (2013) “Pre-Engineered Building Design of an Industrial warehouse” International Journal of engineering sciences & Emerging Technologies.

Jatin D. Thakar (2013) “Comparative Study of PreEngineered Steel Structure by Varying Width of structure” International Journal of Advanced Engineering Technology.

A N Dabhade, Dr. S S R choudhary, Dr. A R Gajbhiye in international journal of engineering research and application in vol.2 issue for july august 2012.

Togan Durmaz and Daloglu, Optimization of roof trusses under snow loads given in Turkish Codes, International conference on Engineering Structures, 28-33, (2006)

Anbuchezian .A, Dr. Baskar.G (2013) “Experimental study on cold formed steel purlin sections” Engineering Science and Technology: An International Journal (ESTIJ), ISSN: 2250-3498, Vol.3, No.2, April 2013 276

“Plastic collapse analysis of thin walled circular tubes subjected to bending” by S. Poonaya, U.Teeboonma, C.Thinvongpituk, 15 th may 2008.

P. P. Desai and M. R. Shiyekar (2014) “Limit Strength Prediction of Light Gauge Steel I Section by Finite Element Method.” Int. Journal of Engineering Research and Applications, ISSN :2248-9622, Vol. 4, Issue 7( Version 4), July 2014, pp.111-114 (2014)

M.G.Kalyanshetti, G.S.Mirajkar, “Comparision between Conventional Steel Structures and Tubular Steel Structures” International Journal of Engineering Research and Application (Ijera) Vol. 2, Issue 6, November- December 2012.

Trilok Gupta, Ravi K. S Harma, “Analys Is of Industrial Shed using Different Design Philosophies” International Journal of Research In Advent Technology, Vol.1, Iss Ue 5, Dec Ember 2013.

Vaibhav B. Chavan, Vikas N. Nimbalkar and Abhishek P. Jaiwal “ Economic Evaluation of Open and Hollow Stuctural Sections in Industrial Trusses”, Aci Structural Journal, March-April 1990.

Davison, T. A. and Birkemoe, P. C. (1982). “Column behavior of cold-formed hollow structural steel shapes.” Canadian Journal of Civil Engineering, 10, 125-141.

http://text.123doc.org/document/2405404-behavior-and-design-of-open-steel-box-girder-bridges-by-up-down-construction-method.htm

A joghataie and M. Takalloozadeh, “Improving Penalty Functions for Structural Optimization”, Transaction A: Civil Engineering Vol. 16, No. 4, pp. 308-320, 2009.

A Csebfalvi and G. Csebfalvi, “Optimal design of frame structures with semi-rigid joints”, Periodica Polytechnica 2007.

Stanislovas kalantal, Juozas, “Discrete Optimization Problems of the Steel Bar Structures”, http://leidykla.vgtu.lt/conferences/MBM_2007/4pdf/Kalanta_Atkoc.pdf.

Yasuyuki Nagano, I Takewaki, T Okamoto, M Tsuji. “Application of Optimum Design Methods to Actual High-Rise Building with Hysteretic Dampers”, 12th World Conference on Earthquake Engineering, Paper ID-1463, Pp. No-1-8, 2000, Japan.

E. Kalkan and S.K. Kunnath, “Lateral load distribution in nonlinear static procedures for seismic design”, http://erolkalkan.com/Pubs/14.pdf, 2004.

Swaminathan Krishnan, Chen Ji, Dimitri Komatitsch, and Jeroen Tromp, “Case Studies of Damage to Tall Steel Moment-Frame Buildings in Southern California during Large San Andreas Earthquakes”, Bulletin of the Seismological Society of America, Vol. 96, No. 4A, pp. 1523–1537, August 2006.

http://www.ecf.caltech.edu/~heaton/papers/Kyoto_buildings.pdf

Sh Hosseinzadeh, B. Mohebi, “Seismic evaluation of all steel buckling restrained braces using finite element analysis”, Journal of Constructional Steel Research 119 (2016) 76-84.

Downloads

Published

06/29/2017

How to Cite

Hussain, B., & Swarup, D. A. (2017). A Review on Steel Structural Analysis for Optimization of Trusses. SMART MOVES JOURNAL IJOSCIENCE, 3(6), 10–13. https://doi.org/10.24113/ijoscience.v3i6.38