A Review on The CFD Analysis of Nano Water Fluid on Helically Coiled Double Tube Heat Exchanger

Authors

  • Sunil Kumar M.Tech. Scholar, IES College of Technology, Bhopal India
  • Ravindra Mohan Professor, IES College of Technology, Bhopal India

DOI:

https://doi.org/10.24113/ijoscience.v5i10.232

Abstract

Heat exchanger is an important device which is used in thermal systems in many industrial fields. Nano fluids are recently employed as coolants to improve the efficacy of heat exchangers. Regarding unique characteristics of Nano fluids, research studies in this area have witnessed a remarkable growth. Latest investigations conducted on use of Nano fluids in heat exchangers including those carried out on plate heat exchangers, double pipe heat exchangers, shell and tube heat exchangers, and compact heat exchangers are reviews and summarized. Meanwhile, some very interesting aspects of Nano fluids in combination with heat exchangers are presented.  The challenges and prospects for future research are presented in this paper.

Downloads

Download data is not yet available.

References

[1] M. M. Patunkar, Rameshwar SSAKHARAM Dolas “Modelling and Analysis of Composite Leaf Spring under the Static Load Condition by using FEA” January 2011.?
[2] B. Pyttel, I. Brunnera “Fatigue behavior of helical compression springs at a very high number of cycles – Investigation of various influences” DOI: 10.1016/j.ijfatigue.2013.01.003 March 2014.
[3] Yunan Prawoto, M. Ikeda “Design and failure modes of automotive suspension springs” DOI: 10.1016/j.engfailanal.2007.11.003 15(8):1155-1174 · December 2008.?
[4] Ladislav Kosec, Aleš Nagode “Failure analysis of a motor-car coil spring” DOI: 10.1016/j.csefa.2013.12.004 4(C) · December 2013.
[5] Senthil kumar Mouleeswaran, S. Vijayarangan “Analytical and experimental studies on fatigue life prediction of steel and composite leaf spring for light passenger vehicles using life data analysis” Vol.13(No.2): pp.141-146 · June 2007.
[6] Bankole I. Oladapo, C.O. Ijagbemi “Design and Simulation of Fatigue Analysis for a Vehicle Suspension System (VSS) and its Effect on Global Warming” 10.1016/j.proeng.2016.08.135.
[7] Izatul Hamimi Abdul Razak “Modeling, Simulation and Optimization Analysis Of Steering Knuckle Component For Race Car” DOI: 10.15623/ijret.2014.0311037 November 2014.
[8] Hari Dayalan, Yeshwant Raj.s “Investigation of Knuckle Joint and Its Importance -A Literature Case Study” January 2018.
[9] Gaurav Saxena, Ankit Chauhan “Simulation and Optimization of wheel Hub and Upright of Vehicle: A Review” DOI: 10.9790/1684-1401034250 January 2017.
[10] Vi Kie Soo, Paul Compston, Paul Compston “Interaction between New Car Design and Recycling Impact on Life Cycle Assessment” DOI: 10.1016/j.procir.2015.02.055 December 2015.

Downloads

Published

10/16/2019

How to Cite

Kumar, S., & Mohan, R. (2019). A Review on The CFD Analysis of Nano Water Fluid on Helically Coiled Double Tube Heat Exchanger. SMART MOVES JOURNAL IJOSCIENCE, 5(10), 21–23. https://doi.org/10.24113/ijoscience.v5i10.232