Design and Analysis of 360 Degree Turning Vehicle

Authors

  • Abhishek Soni B.E. Scholar,Department of Mechanical Engineering, OIST, Bhopal, M.P, India
  • Ataurrahman Ansari B.E. Scholar,Department of Mechanical Engineering, OIST, Bhopal, M.P, India
  • Paritosh Gahlod B.E. Scholar,Department of Mechanical Engineering, OIST, Bhopal, M.P, India
  • Saransh Tiwari BE Scholar
  • Kshitiz Dohare B.E. Scholar,Department of Mechanical Engineering, OIST, Bhopal, M.P, India
  • Jeetesh Damahe BE Scholar Department of Mechanical Engineering, OIST, Bhopal

DOI:

https://doi.org/10.24113/ijoscience.v4i4.131

Abstract

The design and manufacture of a 360-degree DC motor and a steering wheel vehicle are designed to reduce the rotation time from one direction to the other. This vehicle can be moved in all directions in the same position by the steering, the pinion, the DC motor, the bearings and the chain drive. The main function of this vehicle is to move easily from one direction to another. The modern development and economic progress of the Indian society have led to an increase of people on the platform, the increase of the vehicle on the road, due to the lack of space, in the hospital is a big problem in the country. The purpose of this study is the development of a system to reduce the radius of the vehicle. In this system, the first vehicle stops and the wheels are turned in the required direction through the driving system and the DC motor. It has a turning radius equal to almost the length of the vehicle itself. This vehicle was used to transport goods in various areas, such as the platform, hospital, industry and market.

Downloads

Download data is not yet available.

References

. Neville, A., Stanton, Marsden P.(2001), From fly-by-wire to Drive-by wire:Safety implications of automation in Vehicles , Automotive engineering, Vol.109, No.9, Pp.102-106.

. Brian T., Murray,D.,Ambrosis ,Joseph,W., Barbara J. C., System- Safety Process For By-Wire Automotive System, SAE TECHNICAL PAPER SERIES 2000-01-1056A.

. Feng, Y., and Gua, Y., Hubei Automatic Industries Institute, Shiyan,China ,Study of ideal Steering Ratio for steer-by-wire system Based on Simulation Test.

. Chori S., Alonso J.J., and Kroo H.M.,Two-level multifidelity design optimization studies for supersonic jets, Journal of Aircraft, Vol 46,No.776-790.

. Cong ,Z., Jian, X.,Naveediqbal ,M.,(School of electrical engineering,Southwest Jiaotong University ,Chengdu, 6100301

. Eng. Brabec P, doc. Eng. Maly M, Eng Vozenilek R., Faculty of Mechanical Engineering –Technical University of Liberec,Czech Republic ,on “Steer-By-Wire simulation model”.

. Frede, D., Khodabakhshian, M., Malmquist, D., A state-of-art survey on vehicular mechatronics focusing on by-wire system

Downloads

Published

04/20/2018

How to Cite

Soni, A., Ansari, A., Gahlod, P., Tiwari, S., Dohare, K., & Damahe, J. (2018). Design and Analysis of 360 Degree Turning Vehicle. SMART MOVES JOURNAL IJOSCIENCE, 4(4), 10–13. https://doi.org/10.24113/ijoscience.v4i4.131