Comparative Analysis of Different Designs of Triple Tube Heat Exchangers on the Basis of their Performances
DOI:
https://doi.org/10.24113/ijoscience.v8i3.474Keywords:
Heat exchanger, Shell and Tube Heat Exchanger, Triple tube Heat Exchangers.Abstract
Cooling, warming, and air-conditioning systems, electric utilities, chemical based processing structures, food industry, automotive vehicle radiators, and waste heat recovery units are all examples of heat exchanger implementations. Heat exchangers in power plants include air preliminary heaters, economizers, evaporators, super-heaters, condensing systems, and cooling towers. Theoretical and simulation fluid dynamics assessments of varying patterns of a concentric TTHEX were conducted in this study with the intent of enhancing thermal efficiency.
Downloads
References
Bahiraei, M., Mazaheri, N., &Rizehvandi, A. (2019). Application of a hybrid nanofluid containing graphene nanoplatelet–platinum composite powder in a triple-tube heat exchanger equipped with inserted ribs. Applied Thermal Engineering, 149, 588–601. https://doi.org/10.1016/j.applthermaleng.2018.12.072
Said, Z., Rahman, S. M. A., El Haj Assad, M., &Alami, A. H. (2019). Heat transfer enhancement and life cycle analysis of a Shell-and-Tube Heat Exchanger using stable CuO/water nanofluid. Sustainable Energy Technologies and Assessments, 31(December 2018), 306–317. https://doi.org/10.1016/j.seta.2018.12.020
Karimi, A., Al-Rashed, A. A. A. A., Afrand, M., Mahian, O., Wongwises, S., &Shahsavar, A. (2019). The effects of tape insert material on the flow and heat transfer in a nanofluid-based double tube heat exchanger: Two-phase mixture model. International Journal of Mechanical Sciences, 156(December 2018), 397–409. https://doi.org/10.1016/j.ijmecsci.2019.04.009
Mahdi, J. M., Lohrasbi, S., Ganji, D. D., &Nsofor, E. C. (2019). Simultaneous energy storage and recovery in the triplex-tube heat exchanger with PCM, copper fins and Al2O3 nanoparticles. Energy Conversion and Management, 180(May 2018), 949–961. https://doi.org/10.1016/j.enconman.2018.11.038
Nakhchi, M. E., &Esfahani, J. A. (2018). Cu-water nanofluid flow and heat transfer in a heat exchanger tube equipped with cross-cut twisted tape. In Powder Technology (Vol. 339). Elsevier B.V. https://doi.org/10.1016/j.powtec.2018.08.087
Bahiraei, M., KianiSalmi, H., &Safaei, M. R. (2019). Effect of employing a new biological nanofluid containing functionalized graphene nanoplatelets on thermal and hydraulic characteristics of a spiral heat exchanger. Energy Conversion and Management, 180(October 2018), 72–82. https://doi.org/10.1016/j.enconman.2018.10.098
Sheikholeslami, M., Rezaeianjouybari, B., Darzi, M., Shafee, A., Li, Z., & Nguyen, T. K. (2019). Application of nano-refrigerant for boiling heat transfer enhancement employing an experimental study. International Journal of Heat and Mass Transfer, 141, 974–980. https://doi.org/10.1016/j.ijheatmasstransfer.2019.07.043
Sajawal, M., Rehman, T. U., Ali, H. M., Sajjad, U., Raza, A., & Bhatti, M. S. (2019). Experimental thermal performance analysis of finned tube-phase change material based double pass solar air heater. Case Studies in Thermal Engineering, 15, 100543. https://doi.org/10.1016/j.csite.2019.100543
Shafieian, A., Khiadani, M., &Nosrati, A. (2019). Thermal performance of an evacuated tube heat pipe solar water heating system in cold season. Applied Thermal Engineering, 149(December 2018), 644–657. https://doi.org/10.1016/j.applthermaleng.2018.12.078
Elbahjaoui, R., El Qarnia, H., &Naimi, A. (2018). Thermal performance analysis of combined solar collector with triple concentric-tube latent heat storage systems. Energy and Buildings, 168, 438–456. https://doi.org/10.1016/j.enbuild.2018.02.055
Jagirdar, M., & Lee, P. S. (2018). Mathematical modeling and performance evaluation of a desiccant coated fin-tube heat exchanger. Applied Energy, 212(December 2017), 401–415. https://doi.org/10.1016/j.apenergy.2017.12.038
Akyürek, E. F., Geli?, K., ?ahin, B., &Manay, E. (2018). Experimental analysis for heat transfer of nanofluid with wire coil turbulators in a concentric tube heat exchanger. Results in Physics, 9, 376–389. https://doi.org/10.1016/j.rinp.2018.02.067
Mahdi, J. M., Lohrasbi, S., Ganji, D. D., &Nsofor, E. C. (2018). Accelerated melting of PCM in energy storage systems via novel configuration of fins in the triplex-tube heat exchanger. International Journal of Heat and Mass Transfer, 124, 663–676. https://doi.org/10.1016/j.ijheatmasstransfer.2018.03.095
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Vivek Kumar Gautam, Prof. NK Sagar
This work is licensed under a Creative Commons Attribution 4.0 International License.
IJOSCIENCE follows an Open Journal Access policy. Authors retain the copyright of the original work and grant the rights of publication to the publisher with the work simultaneously licensed under a Creative Commons CC BY License that allows others to distribute, remix, adapt, and build upon your work, even commercially, as long as they credit you for the original creation. Authors are permitted to post their work in institutional repositories, social media or other platforms.
Under the following terms:
-
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
